Ideal resin print angles for the Phrozen Sonic 4K or Sonic Mini 4K

Assuming an XY resolution of 35µm, I believe these are the angles which will produce a step-free flat surface. This is obviously not possible for every surface of most models but if there’s one you particularly want to be step-free, give this a shot:

0.01: 15.94539590091

0.02: 29.74488129691

0.03: 40.6012946451

0.04: 48.81407483431

0.05: 55.0079798014

(print layer height followed by angle from the build plate)