Kill Team 2024 Hivestorm Dice, Token, Card and Tool Storage Box STL for 3D Printing

This is a dice, token, card and tool storage holder to suit the contents shown from the Kill Team 2024 Hivestorm box set. It has matching magnet holes in the base and lid to suit 5x1mm magnets.

There are two version – one to suit the cards as they come and one to suit sleeved cards. The sleeves I used to make the box are Sleeve Kings 70x120mm “Tarot” cards, and they’re 100 microns thick. The recesses are much wider and deeper for the sleeved cards (and the box is wider and slightly taller overall) so if you aren’t using sleeves, go for the normal box.

For the regular box, the base is 214 x 166 x 62mm and the lid is 214 x 166 x 46mm.

For the sleeved box, the base is 218 x 181 x 67mm and the lid is 218 x 181 x 46mm.

There is a scale finder so that you can test print a small piece and verify that the token fit is to your liking before committing to printing the entire thing. This is a STL designed for 3D printing and no physical product is provided and no files for tokens, cards or dice are included.

The lids have inbuilt tolerance to allow for easy adding/removing and for various extrusion multipliers – it can be located in place more firmly by using magnets in the magnet holes. There’s a looser and tighter fitting lid included as options as well!

Update 2024-11 – A new variant has been added to the regular card files with spacing to suit the Approved Ops and one team card deck in place of the standard Hivestorm box card sets.